Blue Ocean Tackle Inc. (754) 212-4892

4911 Lyons Technology Pkwy #9

Coconut Creek, FL 33073

Commercial Fishing Supply

Hydro Slave Pot Haulers

FOR HAULING IN YOUR SHRIMP, CRAB, AND LOBSTER TRAPS
HYDRAULIC AND ELECTRIC POT HAULERS AND PORTABLE POWER PACKS

ss_hauler
hydraulic_pot_hauler
90-DEGREE HAULERS

hanging_pot_hauler
HANGING HAULERS

HYDRAULIC & ELECTRIC TRAP PULLERS – MADE IN THE USA

Hydro-Slave pot haulers have a seal to protect the motor shaft from salt water. Stainless steel grease fittings allow you to be able to grease the eye hook swivel, as well as keep the motor’s shaft submersed with grease, to assure no salt water penetration to the motor’s shaft. Standard steel discs are powder coated, and they are also offered in stainless steel.

10’’ HANGING HYDRAULIC
Includes 2 Aluminum Fairlead Rollers
Uses H series motors 101-1003 standard
425 lbs dead lift with 7.5 gpm @ 1500 psi
Standard Steel Discs (Powder Coated) = $964
with S.S. Discs/Splitter, Disc Liners = $1106

12’’ HANGING HYDRAULIC
Includes 2 Aluminum Fairlead Rollers
Uses H series motors 101-1004
600 lbs dead lift with 12 gpm @ 1500 psi
Standard Steel Discs (Powder Coated) = $1148
with S.S. Discs/Splitter, Disc Liners = $1346

14’’ HANGING HYDRAULIC
Includes 2 Aluminum Fairlead Rollers
1200 lbs dead lift with 15 gpm @ 2500 psi
Standard Steel Discs (Powder Coated) = $1866
with S.S. Discs/Splitter, Disc Liners = $2316

17’’ HANGING HYDRAULIC
Includes 2 Aluminum Fairlead Rollers
2900 lbs dead lift with 15 gpm @ 2500 psi
Standard Steel Discs (Powder Coated) = $4864
with S.S. Discs/Splitter, Disc Liners = $5414

10’’ 90-DEGREE HYDRAULIC
Uses H series motors 101-1003 standard
425 lbs dead lift with 7.5 gpm @ 1500 psi
Standard Steel Discs (Powder Coated) = $763
with S.S. Discs/Splitter, Disc Liners = $905
3-Inch Aluminum Fairlead Roller = Add $75

12’’ 90-DEGREE HYDRAULIC
Uses H series motors 101-1004
600 lbs dead lift with 12 gpm @ 1500 psi
Standard Steel Discs (Powder Coated) = $941
with S.S. Discs/Splitter, Disc Liners = $1138
3-Inch Aluminum Fairlead Roller = Add $75

14’’ 90-DEGREE HYDRAULIC
1200 lbs dead lift with 15 gpm @ 2500 psi
Standard Steel Discs (Powder Coated) = $1570
with S.S. Discs/Splitter, Disc Liners = $2016
4-Inch Aluminum Fairlead Roller = Add $86

17’’ 90-DEGREE HYDRAULIC
2900 lbs dead lift with 15 gpm @ 2500 psi
Standard Steel Discs (Powder Coated) = $3950
with S.S. Discs/Splitter, Disc Liners = $4567
5-Inch Aluminum Fairlead Roller = Add $175


Hydro_Slave_Electric_Hauler
Electric_Pot_Hauler
3/4-HP ELECTRIC POT HAULERS
COMMERCIAL DUTY ~ 12 VOLT
18:1, 28:1, OR 36:1
Electric Pot Hauler

Splitter knife can be moved into 4 available positions! Motors are reversible! Can pull in either direction depending on wire placement. Speed up to 322 fpm, and lift up to 197-lbs continuous with the 36:1. Electric haulers will accept rope sizes of 5/16 and 3/8 out of the box. For smaller rope to 1/4″ simply remove the shims, or for larger rope to 3/4″ just add extra shims. Modification (grinding) to the splitter knife may be necessary depending on how rope rides in pinch plates. 80 lbs. Includes wires, solenoid, & switch.
harness

 

HYDRO-SLAVE ELECTRIC HAULERS
10-Inch Discs, 3/4hp Electric Heavy Duty Leesen Motor

STYLE
90 Degree Mount

STANDARD STEEL, POWDER COATED DISCS
$1430.00 (One 3″ Fairlead Roller $75.00 Extra)

STAINLESS DISCS/SPLITTER, & GALVANIZED DISC LINERS
$1572.00 (One 3″ Fairlead Roller $75.00 Extra)


Sea_King_Sport_Hauler
THE SEA KING SPORT
LobsterBoat
A 12″ Stainless 3/4HP Electric Trap Hauler
Includes Switch, Solenoid, Wire Harness, & 3″ UHMW Fairlead

12″ SEA KING SPORT = $1050.00


PERFORMANCE CHART

GEAR RATIO AMP DRAW
FULL LOAD
AMP DRAW
50% LOAD
CONTINUOUS LIFT/
INTERMITTENT LIFT 
18:1 75 37.5 77 LBS / 419 LBS
28:1 75 37.5 119 LBS / 652 LBS
36:1 75 37.5 153 LBS / 840 LBS


OPTIONAL HAULER ACCESSORIES
Hydro Slave pot haulers can be purchased with optional disc wear liners to protect your pinch plates from wear. Honda power packs can also be purchased along with hydraulic tanks and all of the necessary components to run your haulers if you do not already have hydraulics installed on your vessel.

galvanized_disc_liners
DISC WEAR LINERS

10″ $19.00/set, 12″ $23.00/set
14″ $39.00/set, 17″ $110.00/set


Tanks
HYDRAULIC FLUID TANKS

3 Gal (12x12x6) $225
6 Gal (16x16x6) $268
12 Gal (16x16x12) $325
24 Gal (21x22x12) $465

Tank must hold 1 gal of oil per every gpm pump is rated for, or 50% of this if running @ idle. Example: 24 gal tank for a TC-24 pump. If running @ idle then you can get away with a 12 gal tank.


honda_power_pack
5.5 HP HONDA POWER PACKS
11 GPM @ 2000 PSI
1/2″ NPT OUT & 3/4″ RETURN
3-GAL OIL TANK

The 2-stage pump has a stable kick down feature which will cut the flow of oil and prevent the motor from stalling if your gear gets hung down. When the gear frees up normal hauling speed will return.

MANUAL START (70-LBS) = $1365
ELECTRIC START (79-LBS) = $1555

Dims: 22″ x 22″ x 20″ tall
Weight: 68-lbs (no oil, no gas)

*Control valves & hoses sold separately


hydro_slave_hanging_hauler

Hydraulic Motor on a
10″ Hanging Hauler

10_inch_hydraulic_hauler

S.S. 10″ Hauler with
Galvanized Disc Liners

Hydro_Slave_Stainless_Splitter

14″ Stainless Splitter
 

14_inch_hydraulic_pot_hauler

14″ 90-Degree Hydraulic Motor

Hydro_Slave_Parts

Hauler Replacement Parts

Aluminum_Fairlead_Roller

4″ Aluminum Fairlead Roller

SS_Discs

SS Discs & Galvanized Liners

honda_power_pack (1)

Honda Power Packs

ss_splitter

SS Splitter Knives


WordPress Image Lightbox Plugin