Vertical Mount Stainless Steel 12″ Pot Hauler
FORMERLY KNOWN AS CUSTOM SEA GEAR, WATERMAN PROVIDES A VARIETY OF POT HAULERS THAT MAKES PULLING UP YOUR TRAPS, CLAM RAKES, OR OTHER MARINE GEAR AS EASY AS PUSHING A SWITCH! GREAT FOR BOTH SPORT AND COMMERCIAL FISHERMEN, CRABBERS, SHRIMPERS, AND MORE!
VERTICAL MOUNT STAINLESS STEEL 12″ POT HAULER
‘DIRECT DRIVE HYDRAULIC PULLERS’
OR ‘ELECTRIC GEAR REDUCTION UNITS’
CAN BE USED WITH 1/4″ TO 7/16″ ROPE
3/4 HP SCOTT ELECTRIC 12VDC – $1490.00
1 HP SCOTT ELECTRIC 12VDC – $1545.00
HYDRAULIC – $1162.00 (Click here for motor options)
GEAR RATIOS: 10:1, 20:1, 30:1, 40:1, 50:1, 60:1
CAN BE SPECIAL ORDERED WITH 20:1 OR 25:1
*FAIRLEAD ROLLERS ARE NOW ALUMINUM!
BOTH INCLUDE ALL STAINLESS STEEL CONSTRUCTION WITH 12″ PINCH SHEAVES AND A STAINLESS SPLITTER KNIFE AND BACK PLATE. MOUNT THIS PULLER TO THE BOOM SHOWN BELOW OR TO A BULKHEAD.
*CLICK HERE TO READ WARNINGS AND SPECS*
SCOTT 3/4 HP – $422.00
SCOTT 1 HP – $494.00
12V FOOT SWITCH
USE WITH ELECTRIC HAULER
STAINLESS 78″ BOOM = $625.00
4″ S.S. OPEN BLOCK = $185.00
Block Weight: 4.5 lbs/Box size: 10″x10″x4″
78″ HEAVY DUTY STAINLESS BOOM
(HAULER AND BLOCK SOLD SEPARATELY)
2″ SCHEDULE 40 STAINLESS BOOM WITH BOTTOM AND SIDE MOUNTING BRACKETS FOR EITHER PORT OR STARBOARD MOUNTS. WALL THICKNESS IS .150″ (Just over 1/8″). 78″ TALL, HANGS BLOCK OUT OVER THE WATER. STAINLESS HAULER MOUNTS DIRECTLY TO POLE, LINE RUNS UP OVER THE BLOCK, DOWN AROUND ROLLER, THEN INTO THE SHEAVES. SPLITTER KNIFE REMOVES LINE AUTOMATICALLY.
“I’m very impressed w/ the quality of all the parts you sent me (Unit pictured on the left). It is all very heavy duty, good welds, and top quality. I really appreciate that. The investment in the equipment is really worth it. I will gladly recommend you to my friends. Thanks for everything.” Mike B./Gold River, CA
12 VOLT FOOT SWITCH
Foot control switch for manually operated (hand controlled) trolling motors. Provides the convenience of turning the motor on by simply pressing down on the switch with your foot without having to reach the trolling motor head. The foot switch is rated up to 50 amps DC and features a 15° tilt angle for ease of operation. Has flip lever for continuous ”on”.