Blue Ocean Tackle Inc. (754) 212-4892

4911 Lyons Technology Pkwy #9

Coconut Creek, FL 33073

Marine Supply & Equipment

Links & Shackles

LINKS AND SHACKLES
KENTER LINKS & DETACHABLE CHAIN CONNECTING LINKS
TRIANGLE TOW PLATES

CROSBY SHACKLES
crosby_bolt_type_shackles
screw_pin_shackle

Screw Pin Anchor Shackle
G-209/S-209

screw_pin_chain_shackle

Screw Pin Chain Shackle
G-210/S-210


bolt_type_anchor_shackle

Bolt Type Anchor Shackle
G-2130/S-2130

round_pin_shackle

Round Pin Anchor Shackle
G-213/S-213

round_pin_chain_shackle

Round Pin Chain Shackle
G-215/S-215

bolt_type_chain_shackle

Bolt Type Chain Shackle
G-2150/S-2150


ALLOY TOW SHACKLE
ANCHOR PATTERN
anchor_shackle
ALLOY TOW SHACKLE
CHAIN PATTERN
chain_shackle


MARQUIP SHACKLES OFFER MAXIMUM LOAD CAPACITY AND SAFETY FOR MARINE AND CONSTRUCTION HEAVY LIFT OPERATIONS UTILIZING A 6:1 WORKING LOAD LIMIT. WIDE JAWS FACILITATE EASY INSTALLATION ON CHAINS, FLOUNDER OR TOW PLATES, TOW WIRE, BELL SHACKLES AND PAD EYES. BOTH BAILS AND PINS ARE FORGED OF 4340 EXTRA HIGH STRENGTH ALLOY STEEL. EACH PIN IS THEN SPECIALLY MACHINED AND INDIVIDUALLY PRECISION FITTED TO ITS SHACKLE TO MINIMIZE WEAR FROM HEAVY OR SURGING LOADS AND VIBRATIONS. ALL SHACKLES AND PINS ARE HEAT TREATED AND MAGNETIC PARTICLE INSPECTED. WORKING LOAD LIMITS RANGE FROM 40 TONS TO 185 TONS, DEPENDING ON SHACKLE SIZE AND STYLE.
SAFETY PINS RANGE IN DIAMETER FROM 2 TO 4-1/4 INCHES
tow_shackles_yellow
IMPORT TOW SHACKLES
MADE IN PERU


towplates
MARQUIP TOW PLATE & ASSEMBLIES
TOWING PLATES THAT ARE SIMPLER, STRONGER, AND SAFER!

tow_plates


towassy
ITS PATENTED DESIGN LETS YOU RIG THE BRIDLE WITH ONLY THREE SHACKLES, ELIMINATING THE EXTRA COST, WEIGHT, TIME AND RISK OF OLDER-STYLE FLOUNDER PLATES. THE NO. 2 TOW PLATE FEATURES AN EXTRA HOLE FOR A TANDEM SHACKLE TO TOW ADDITIONAL BARGES, OR TO HAUL IN THE BRIDLE. CAST FROM NICKEL-CHROME STEEL, MARQUIP PLATES ALSO PROVIDE MAXIMUM CORROSION RESISTANCE. THEY ARE AVAILABLE IN 300,000#, 500,000# AND 1,000,000# PULL TEST CAPACITIES, WITH WEIGHTS OF 70 LBS, 190 LBS, AND 560 LBS, AND CAN BE CERTIFIED UPON REQUEST.


TOW PLATES ~ MADE IN ARGENTINA
ACSA_Tow_Plates
PLATE NO. 1
38-51 (1-1/2″ to 2″)
Weight: 75 lbs.
Proof test: 300,000 lbs.

triangle_n1_towing

PLATE NO. 1
38-51 (1-1/2″ to 2″)
Weight: 75 lbs.
Proof test: 300,000 lbs.

triangle_n1_towing

PLATE NO. 3
89-102 (3″ – 4″)
Weight: 485 lbs.
Proof load: 624,000 lbs.

triangle_n2_towing


MARQUIP
mqlinkcomparechain_link_illustration
FORGED DETACHABLE CHAIN CONNECTING LINKS
REPLACE BULKY SHACKLES AND END LINKS. THEY MAKE BETTER-THAN-ORIGINAL REPAIR OR REPLACEMENT LINKS, THEY SERVE AS CONNECTING LINKS FOR 90′ SHOTS OF CHAIN AND THEY RIDE THROUGH HAWSE PIPES AND OVER WILDCATS AS SMOOTHLY AS NORMAL CHAIN. MADE OF ALLOY STEEL, HEAT-TREATED TO TENSILE STRENGTH OF APPROXIMATELY 150,000 PSI, THEY’RE AS STRONG AS OR STRONGER THAN THE CHAIN LINKS. THE POSITIVE-LOCK ASSEMBLY CONSISTS OF A STAINLESS STEEL PIN AND LEAD PLUG; THE BREAK TESTS SURPASS USN AND ABS REQUIREMENTS. ADDITIONAL CERTIFICATIONS ARE AVAILABLE UPON REQUEST. LINKS ARE AVAILABLE IN SIZES UP TO 3-1/2″. CAST LINKS ARE ALSO AVAILABLE, IN SIZES UP TO 4-3/4″.


anchor_swivels

ANCHOR CHAIN SWIVELS
FOR 1/2″ TO 4″ CHAIN

green_pin_shackles

VAN BEEST
GREEN PIN SHACKLES

oval_pin_joining_shackle

OVAL PIN
SHACKLES

pear_links

PEAR LINKS
NO. 2 – NO. 12


Kenter_Links_Black
KENTER LINKS
DETACHABLE CHAIN CONNECTING LINKS
IMPORT & DOMESTIC

5/8″ TO 4-1/2″ CHAIN SIZE
kenter joining link


back_out_punch_tool
WARWOOD TOOL COMPANY
BREAKDOWN TOOLS WITH 16″ FIBERGLASS HANDLE

Designed for drifting holes, aligning and driving pins, the blacksmith’s round punch is fitted with a handle and has a punch end that is tapered from point to body.

Designed for backing out bolts, rivets and pins, the blacksmith’s backing out punch is fitted with a handle and has a punch end that is the same diameter from point to body. Do not use for grouser pin installation or removal.


punch_tools
NO. H-324 BACKING OUT PUNCH TOOL
FOR KENTER LINKS
3/8” DIA – (1-LB) $62.00
1/2″ DIA – (1-3/4 LBS) $68.00
5/8” DIA – (2-LBS) $69.00
3/4″ DIA – (2-1/2 LBS) $71.00
7/8” DIA – (3-LBS) $76.00
1” DIA – (3-1/2 LBS) $83.00

Never use a punch with a mushroomed struck face or a chipped or deformed point. Discard any punch if it is bent or shows cracks, chips, mushrooming or excessive wear.


WordPress Image Lightbox Plugin